There now follows an
alphabetical listing (within sections) of non-Hornby spare parts available
(Bassett-Lowke, Bing, Leeds Model Co., carette, etc.
Buildings and Lineside Accessory parts
Finial, Signal, with thick
square base and spigot. B-L tinplate type
(1-1/16in. overall) £1.50
Finial, Signal, with thin
square base and spigot. B-L wooden-post
type (15/16-in. overall) £1.50
Fork piece, steel. 7/16-in.
overall £1.25
Milk Churn, Britain's
original. without lid. 1-in.
height. Qty. 6 £8.00
Milk Churn. Similar to
Britain's, but unidentified. 1-⅛-in. height. Without lid £2.00.
Pulley, Signal wire,
(non-moving part) £1.50
Pulley, Signal,brass, on
single post Trunnion £2.50
Pulley, Signal, 2-part -
Trunnion & Wheel (Milbro and Bonds
style) Pair £2.50
Pulley Trunnion
double-bracket. Level hole on each side
£1.50
Pulley, loose, assorted small
sizes Each £0.75
Signal Balance Weight and
Pivot, brass, B-L £1.75
Signal Base, square casting.
B-L wood post type £1.50
Signal Base, 2 upright
pillars, off-set holes £1.50
Signal Bell Crank, ½-in.
arms, drilled £1.50
Signal 'Blind'. (hinged
'hammer') B-L style £0.75
Signal & Point Rodding
Guide - LMC and Milbro style £1.50
Signal & Point Rodding Connector,
brass £2.00
Terminal Nut, milled edge.
6BA thread £2.50
Termuinal Bolt, with hex. nut
and insulating washers, 6BA thread £2.25
Tree Base, round (B-L
type) £1.50
Track parts
Rail Chair. B-L and W & H
style £0.25
Rail Joiner (Fishplate). B-L
style £1.50
Rail Joiner (Fishplate).
Marked 'Bonds' £0.50
Rail Pin, G-1 £0.10
Rodding Guide, brass,
rectangular base with rounded corners
£1.50
Buffers
Buffer, sprung type. Assorted
profiles £2.50
Buffer, not sprung. Assorted
profiles £1.50
Buffer, brass, straight
barrel, 5/16th. face £1.75
Buffer brass, straight barrel
with collar (Marklin style) £2.00
Buffer, brass, 'bell-shape'
(Bing profile) £2.00
Buffer, brass, tapered
barrel, 5/16 head, (Bond's style) £1.75
Buffer, oval, cast, 9/16-in;.
length, with square shoulder LMC style
£1.25
Buffer, oval, cast, ⅝-in.
length, G-1 later type, possibly as used by Winteringham £1.50
Buffer, oval, cast. ¾-in.
dia. G-1 Bing 21 Series £2.00
Buffer, 'rectangular' (rounded
corners), cast, ⅝-in. length. G-1 £1.50
Buffer, 'rectangular',
(rounded corners). ½-inch length Casting from original B-L brass £1.50
Buffer, 'rectangular'
(rounded corners), 5/16-inch length. Casting, with long spigot (Milbro style) £1.00
Buffer, rectangular, cast,
7/16-in. length; thin barrel, LMC post-war style £1.25
Buffer, rectangular, cast.
¾-in. length. G-1 £1.50
Buffer, round, cast. B-L loco.
£1.00
Buffer, round, cast,
½-in.dia.,, G-1 Marklin, with concentric rings
£1.50
Buffer, round, cast, ½-in.
dia., G-1 Carette with straight barrel £1.50
Buffer, round, steel, tapered
barrel, ⅜-in. face £2.00
Buffer, round, brass, small
coned head, curved barrel £1.50
Buffer, round, cast. Bing
wagon/van £1.00
Buffer, round, cast, straight
barrel .Later Bing wagon/van £1.00
Buffer, round, cast. 7/16-in.
face. 'Solid' type, without spigot
£0.75
Buffer, round, small, with 2
'collars'. Early Bing £0.75
Buffer round, copper. Large
head, ⅜-in. barrel. Exley
style £0.50
Buffer, oval, cast, long
barrel. Carette Coach £1.50
Buffer, oval, 9/16-in;.
length, with sqyare shoulder. LMC style
Buffer, rectangular, cast.
LMC post-war style £1.25
Buffer, rectangular, ⅝-in.
length, cast. LMC non-lok style
£1.25
Couplings
Coupling, 3-link. Sprung wire type. B-L pattern £3.50
Coupling, JEP 'Big Hook'
£3.50
Coupling, Bing pre-1908 style £3.50
Coupling, Exley G-0 style £2.50
Coupling, drop-link, sraight
1-hole fixing, suit B-L 0-6-0T loco. £2.50
Coupling, drop-link, long, 2-hole
fixing. B-L type £2.50
Coupling, drop-link, round
2-hole fixing, plated, Bing type £3.00
Coupling, drop-link, small
1-hole fixing, Milbro £2.00
Coupling, drop-link, round
2-hole fixing, Bing £2.50
Coupling, drop-link with
shaped front edge, Bing early 21 series style
£3.50
Coupling, LMC spring
type £4.50
Loco. and Tender parts (other than buffers and
couplings)
Axle, knurled. Numerous specifications P.O.A
Axle, threaded. Numerous specifications
P.O.A
Axle Carrier, (Axle Box), casting,
B-L Mogul Tender (LNER) £2.00
Axle Carrier (Axle Box),
casting, numerous patterns as yet unidentified £2.00
Bush, brass, tri-angular,
5/16-in. sides. £0.75
Chimney, large, 1in. height,
central hole £2.50
Chimney, ⅞-in. height,
no rop band, Central hole. LMC Midland type
£2.00
Chimney, large 1-in; height,
with rims, central hole £1.75
Chimney, extra large, 1-⅛in.
height, 2-lug fixing £2.50
Chimney, squat with square
base. 2-lug fixing. Bing 'Apollo' £2.50
Chimney, double, squat £2.50
Chimney, single, squat,
central short spigot £2.00
Chimney, single, ⅜-in.
height, central spigot £2.25
Control Knob, flat head,
milled edge. 6BA £1.75
Control Knob, flat head,
milled edge, 7BA £1.75
Control Knob, 'onion-shape'
7BA thread (G1) £2.00
Control Knob, 'onion-shape'
9BA thread (G0) £1.75
Control Knob, spherical, 7BA,
9BA
£2.00
Control Knob, long hexagonal,
steel, 6BA £2.00
Coupling Rod, 2-in. centres.
B-L (12) £2.00
Coupling Rod, 2½-in. centres.
B-L and Bing standard 4-4-0 types
£3.50
Coupling Rod, B-L 6-coupled
type. (0-6-0, 2-6-4T, 4-6-0 etc)
Each £5.00
Coupling Rod, B-L 6-coupled
(Scotsman, Montrose) Each £5.00
Coupling Rod, Marklin
6-coupled type Each £5.00
Coupling Rod, Bing Midland
Compound, 2P Each
£3.00
Coupling Rod, 2-¾-in;.
centres. (B-L long wheelbase 0-4-0)
Each £3.00
Crank Nut, hexagonal, 7BA
thread £1.50
Crank Nut, round, slotted
head. 7BA thread £1.50
Crank Pin, ½-in. length, with
slotted head. B-L longer type £1.50
Crank Pin, 7/16-in. length,
with slotted head. B-L medium length type
£1.50
Crank Pin, 5/16-in. length,
with slotted head. B-L shorter type £1.25
Crank Pin, ⅝-in.
length, flat slotted head. B-L type £1.50
Crank Pin, ⅜-in.
length, slotted head, deeper shoulder B-L
type £1.50
Crank Pin, steel, without
thread. Various P.O.A.
Cylinder casting. B-L Royal
Scot £6.50
Cylinder casting. B-L
Compound £5.00
Dome, extra large, 1-3/16-in.
dia. £2.50
Dome, helmet shape, B-L/Bing
Duke of York, etc. £1.75
Dome with Whistle Lever. LNWR
type. 15/16-in. dia., threaded spigot
£2.50
Dome, small, ⅞-in.
dia., threaded spigot £1.50
Dome, squat, ⅞-in.dia.,
central spigot £1.50
Dome, deep, 15/16-in. dia.,
thick spigot £1.50
Drawbar Plate, B-L Mogul,
metal £2.50
Handrail Knob, steel, B-L J39
and 4F type. With washer and nut £2.50
Handrail Knob, steel, B-L
Prince Charles £1.50
Handrail Knob, brass, Bing
'Duke of York' £1.75
Lamp, loco. with cast square
spigot. Bing type, G1-G2 £1.75
Lamp, loco, with thin metal
spigot and wire handle (Marklin?)
£2.00
Pick-Up Spoon, double, LMC
type. £8.00
Piston & Connecting Rod,
3-in. centres, tapered rod. £5.00
Steam Pipe Cover, tinplate £1.75
Tender Draw Bar, B-L long
shank with pin £3.50
Tender Fall Plate, deep
curved, Bing & B-L £4.00
Tender Vent, B-L style,
straight barrel £1.50
Tender Vent, B-L Mogul, hook
shape, small £1.25
Tender Vent, straight barrel
with cover £1.25
Trailing Bogie, B-L Flying
Scotsman (pressing only, no wheels)
£5.50
Valve Gear complete. B-L
Royal Scot £22.00
Valve Gear complete, B-L
Flying Scotsman £25.00
Whistle, brass, Bing 0-6-0T
(bifurcated) £1.50
Mechanism parts
Brush, carbon, cylindrical,
1-in. length £1.50
Brush, carbon, rectangular,. ⅞-in.
x ⅜-in. £1.50
Brush Cap, ¼-in. dia, slotted
head £1.75
Brush Cap, ⅜-in. dia,
slotted head, milled edge £2.50
Brush Cap, 5/16-in. dia,
slotted head £2.25
Brush Cap, ⅜-in. dia,
slotted head, milled edge £2.50
Frame Spacer, cylindrical, ⅞-in.
length, threaded interior at both ends
£2.00
Spacer for Coupling Rod.
Brass £1.50
Spacer for various mechanism
applications - numerous patterns
available. Send photo or sample. P.O.A.
Coach and Wagon parts (other than buffers and couplings)
Axle Carrier (Axle Box),
casting, numerous designs as yet unidentified.
Each £2.00
Axle Box Cover, tinplate, B-L
1921 type £0.75
Axle Frame - large scale.
Numerous patterns available - send sketch or sample P.O.A.
Axle Frame - Bond's
style Some brass originals, others white
metal replica. £2.50
Axle Frame, LMC wagon
type £2.00
Bearing, brass,
double-facing, 3/16-inl flat face, plus ¼-in. flat face £2.00
Bearing, cast, double-facing,
¼-in. flat face, plus 5/16-in. tapered face
£1.50
Door Handle, Coach, 'tap'
design'. Bing style, with wire spigot
£1.75
Vent, coach roof. Milbro
type £1.50
Vent, coach roof, Marklin
gauge 0 £1.50
Vent, coach roof, small with
flat top (Marklin?) £1.25
Vent, coach roof, B-L up to
1931 £1.25
Vent, coach roof, B-L T.P.O. style £1.50
Vent, coach roof, LMC
1920-1940 LMS/LNER £1.25
Vent, coach roof, torpedo
type with wide centre section £1.25
Vent, coach roof, sea-shell
pattern £1.50
Vent, coach roof, 'helmet'
type with longitudinal ridge £1.50
Vent, coach roof, G-1 Marklin style £1.75
Vent, coach roof, torpedo
type with pointed ends, standard B-L type
£1.50
Vent, coach roof, torpedo
type, very narrow profile £1.25
Vent, coach roof, torpedo
type, G-1 Bing style £1.75
Vent, coach roof, finial
style, with pin atop £1.25
Vent, coach roof, sea-shell
pattern, small. Believed Milbro style
£1.25
Vent, coach roof, torpedo
type, small, with pointed ends £1.25
Vent, coaxch roof, torpedo
styles, tiny £1.00
Vent, coach roof, torpedo
type, B-L 1931-1940 all companies plus TPO £1.50
Vent or wagon drain cock,
cast, small. Bing £0.75
Live Steam parts
Piston with tapered
Connecting Rod - Bowman? Each £6.50
Safety Valve, B-L Mogul,
Enterprise £6.50
Safety Valve Cover (dome)
with central hole £2.00
Filler (Level) Plug, brass,
milled edge £3.50
Screws, Nuts, bolts, etc.
Bolt, brass, countersunk.
5/16-in. length £0.10
Bolt, brass, countersunk,
½-in. length £0.10
Bolt, steel, chisel-head.
9/16-in. length £0.20
Bolt, brass, chisel-head ⅜-in.
length £0.10
Bolt, brass, chisel-head. 2⅛-in.
length £0.25
Bolt with Nut, standard
Meccano Qty.50 £5.00
Nut, square, standard Meccano
thread Qty.50 £5.00
Nut, square, 6BA thread
(Mech. side plate?) £0.10
Nut, hexagonal, ¼-in. 6BA
thread £0.15
Nut, hexagonal, 3/16-dia.,
7BA thread (narrow) £0.15
Nut, hexagonal, 7/32-in. dia,
6BA thread (thicker) £0.15
Tools and Accessories
Electrical Bonding Clip,
copper, with spring clip on base and terminal nut £2.00
Rivet, copper small head,
¾-in. barrel £0.10
Wheel Puller, small throat £8.00
Wheel Puller, medium
throat £9.00
Wheel Puller, large throat
£10.00
Wheels
Driving Wheels (flanged)
18-spoke
18-spoke B-L, 1⅝in. tread
dia. Recessed boss. Keyed washer fixing (Compound, Duchess, etc) (7) £4.50
16-spoke
16-spoke, 1.5in. tread dia. Nutted type
(believed second-tier manufacturers)
(1) £4.00
16-spoke. 1⅝in. tread
dia. (42mm). With crank and countrbalance (B-L pre-1935). Originals. (5 only)
(22)
£6.00
16-spoke. 1½in. tread
dia. With crank and counterbalance. (B-L
sttyle, light casting) (33) £3.00
14-spoke
14-spoke, 1¼in. trezd dia.
Protruding crank boss. Believed Marklin style
(3) £4.00
14-spoke, 2in. tread dia.
Flat boss. With counterbalance (large gauge) (6)
£6.00
14-spoke, 1½in. tread dia.
With crank. Bing 0-6-0 styl
(12) £4.00
14-spoke, 1½in. tread dia.
With crank B-L 0-6-0 style (12)
£4.00
14-spoke, 1-11/16in. (42mm). With
crank and counterbalance. (Bing for B-L DoY, GV, etc) (18)
£4.50
14-spoke. 1½in. tread dia.
With crank and counterbalance.
(21) £4.50
14-spoke 1¼in. tread dia.
Gaue 1 Tender (believed) (37) £3.00
14-spoke, 1⅝in. tread
dia. With crank and counterbalance.
Flat boss (38) £4.00
14-spoke, 1⅝in. tread
dia. With crank and counterbalance. Recessed boss (38)
£4.00
12-spoke
12-spoke, 1⅛in. tread
dia. Protruding crank boss. With counterbalance (5)
£4.00
12-spoke, 1⅛in. tread dia. Without counter-balance (5)
£4.00
12-spoke. 1-1/16in. tread
dia. No crank (Chad Valley,Mettoy, Brimtoy style). Possibly B-L tender (29)
£2.50
12-spoke. 1-3/16in .tread dia. No crank. Square rear boss. (Hornby?) (32) £3.00
10-spoke
10-spoke, 1⅛om tread
dia. No crank (9)
£3.50
10-spoke, 1in tread dia. With
crank (believed Mettoy/Brimtoy) (11) £2.50
10-spoke, 1in. tread dia.
With crank. (13) £2.50
10-spoke. 1-1/16in..tread
dia. No crank. (19) £2.00
10-spoke. 1in. read dia.
Dished back. (B-L 'Prince Charles' tender) (27) £2.50
10-spoke. 15/16in. tread dia.
No crank (31) £2.50
10-spoke. 15/16in. tread dia.
No crank. Narrow tread. Chad Valley/Mettoy style (31)
£2.50
8-spoke
8-spoke, 15/16in. tread dia.
Protruding crank (10) £2.50
8-spoke, 15/16in. tread
dia. No crank (24) £2.00
8-spoke. ⅝in. tread
dia. Dished back. (B-L bogie, except 'Prince Charles') (28) £2.00
8-spoke. ¾in. tread dia. Bogie/pony.
(30) £2.00
Centre Driving Wheels (flangeless)
18-spoke, 1⅝ tread dia.
With counterbalance. Square axle aperture
(8) £4.50
14-spoke, 1⅜in. tread
dia. With crank and counterbalance (15)
£4.50
14-spoke. 1½in. tread
dia. With crank and counterbalance. (B-L 0-6-0T and Mogul) (17)
£4.50
Coach and Wagon Wheels
Spoked
10-spoke, 7/8in. tread dia.
Dished back (4) £2.00
10-spoke, 1-5/16in. tread dia. Large axle hole. Large gauge
(36) £2.50
10-spoke, 1¼in. tread
dia. Bulbous front boss. Smaller axle hole. Large gauge (36) £2.50
8-spoke, 7/8in. tread
dia. (B-L Wagon) (2) £2.00
8-spoke, 1½in tread dia. No
crank. Large scale wagon (?) (6) £2.50
8-spoke, 1⅛in. tread
dia. Large-scale (16) £2.50
7-spoke. ⅞in. tread dia. Slightly protruding front boss. (B-L Coach) (26)
£2.00
6-spoke, 1in. tread dia.
recessed face (G-1) (14) £2.50
6-spoke, 1¼in. tread dia.
Recessed face. Large scale (20) £3.00
Solid - larger gauges
Solid centre (Mansell type)
1½in. tread dia. Large gauge (25)
£3.00
6-spoke (embossed on
solid)1-1/16in. tread dia. White metal replica of tinplate large gauge (34)
£2.50
Solid centre, 1-1/16in. tread
dia. Concentric ringed, large gauge
(35) £2.50
Solid centre, 1in tread dia.
White metal replica of tinplate large gauge
(35) £2.50
Solid centre, 1-5/16in. tread
dia. Mansell-type wheel, large gauge (35)
£2.50
end of spares l;isting